Best mortgages and remortgages
HouseProfessionals.com
 
Channels
Business search
DIY advice
DIY brickwork
DIY central heating
DIY decorating
DIY electrics
DIY plumbing
General DIY
Jargon buster
Bricklaying
Carpentry
Decorating
Electrical work
Floor laying
Ground work
Heating
Plastering
Plumbing
Roofing
Magazine
Mortgages & remortgages
Property & moving
Quote me now!
Save money
Web chats

DIY | A to Z of trade jargon | Heating


A to Z of trade jargon: Heating


Balanced Flue BTU Condenser
Copex Gravity Fed Indirect
KW Leigonella Pressured System
Split System TRVs  

BALANCED FLUE
A horizontal gas flue that has concentric tubes, i.e. one inside the other, arranged in this way so that one tube carries out the exhaust fumes and the other brings in the air for combustion. The combustion chamber is thus room-sealed and safe.
Back to the top

BTU
British Thermal Units. A measurement of heat output now replaced by kW. 1 Btu / Hr = 0.000293kW. A 90,000BTu boiler is approximately 26kW.
Back to the top

CONDENSER
The outside unit in an air-conditioning system that disperses the waste heat and condenses the gas back to a liquid.
Back to the top

COPEX
A trade name for flue liners made from flexibly jointed stainless steel. This is used to line brick flues to prevent carbon monoxide leaking into the house.
Back to the top

GRAVITY FED
A central heating system that does not use pumps but circulates the water by gravity and water expansion.
Back to the top

INDIRECT TANK
This is the hot water cylinder where the water for basins and baths is heated by a coil of piping inside the cylinder or tank. The coil of piping is connected to the central heating system and acts as a radiator.
Back to the top

KW Kilowatts
A measurement of power, which may be expressed as energy, consumed in a period such as kW/hrs.
Back to the top

LEIGONELLA
The term given to a group of bacteria that thrives in water of between 15 and 450C. The bacteria can infect susceptible people and result in an illness similar to pneumonia. The bacteria has been found in shower heads and it is therefore a good idea to have the domestic water supplies from storage systems regularly flushed professionally if there are persons using systems who are elderly or with health problems. The systems particularly prone are older mixers where the hot and cold are mixed remote from the head.
Back to the top

PRESSURED SYSTEM
A hot water and radiator system that has a sealed pressure vessel to deal with expansion and a safety valve to prevent damage. The advantage is that higher temperatures can be reached, a header tank does not limit the height of radiators and the system can be compact for flats. The system does need special approval from the local council building control.
Back to the top

SPLIT SYSTEM
A term used to describe comfort cooling, commonly termed "air-conditioning", where the room evaporator and the outside condenser are split and not within a combined unit.
Back to the top

TRV'S
Thermostatic radiator valve. A room temperature sensing valve on a radiator, which locally switches off the radiator at a preset temperature.
Back to the top


Courtesy of Urang: London's leading building company
Quotes

Mortgages and remortgages

Home | Advertise with us | Advertiser login | Business search | Search by location | DIY advice | Property advice

About us | Contact us | Site map | Use our search bar | Terms of use | Privacy policy


© HouseProfessionals.com

Other web sites: Health clubs and gyms | LocateaBuilder.co.uk | LocateaPlumber.co.uk | miCreator.com | Free quotes